Olympus BX41 Front to Back Bridge Removal

Read the Edited Video Transcript for ‘Olympus BX41 Front to Back Bridge Removal’

Hello everyone, this is Walker Kelly with Munday Scientific Customer Service. Today, we’re going to show you how to disassemble the front-to-back bridge system on an Olympus BX41 microscope.

We’ll walk through the process step by step, including:

• Removing the eyepieces
• Removing the microscope heads
• Removing the bridge assembly

---

Step 1: Remove the Eyepieces

The first step is to remove the eyepieces.

Each microscope head typically contains two eyepieces, although for demonstration purposes only one set may be installed.

Removal Steps:

1. Grip the eyepieces gently
2. Pull straight upward
3. Set them aside in a safe location

---

Step 2: Remove the Microscope Heads

Next, we’ll remove the viewing heads.

Locate the 3 mm Allen Wrench

On the upper-right side of the microscope, you’ll find the built-in 3 mm Allen wrench.

1. Remove the wrench from its holder
2. Locate the screw access hole beside the microscope head

---

Loosen the Head Retaining Screw

1. Insert the Allen wrench into the screw hole
2. Loosen the retaining screw a few turns

⚠️ Important:
You do not need to remove the screw completely.

Once the screw is loose:

• The head will slide free
• You can lift it off and set it aside safely

---

Remove the Second Head

The opposite side of the bridge has the same screw arrangement.

Repeat the process:

1. Insert the wrench
2. Loosen the screw a few turns
3. Remove the second head carefully

Keep the Allen wrench nearby, as you’ll need it for the next step.

---

Step 3: Remove the Front-to-Back Bridge Assembly

Now we’ll remove the bridge assembly itself.

Bridge Removal Steps

1. Rotate the microscope so it faces forward
2. Locate the retaining screw beneath the original head mounting location
3. Insert the 3 mm Allen wrench
4. Loosen the screw a few turns

Once loosened:

• The bridge assembly will come free
• Carefully lift it off and set it aside

---

Final Step

After removing the bridge assembly:

1. Return the 3 mm Allen wrench to its holder
2. Store all removed components safely

This helps prevent losing parts during packing or shipping.

---

Final Thoughts

And that’s how to disassemble a front-to-back bridge system on an Olympus BX41 microscope.

If you need additional help:

• We also have a complete BX41 disassembly tutorial
• We also offer videos on proper microscope packing and shipping procedures

---

Contact Information

For additional support or microscope service information, contact Munday Scientific.

Visit our online shop at: MicroscopeMarketplace.com

---

Closing

Thank you for watching, and have a great day! If you like this video, subscribe to our YouTube Channel to get more.