Nikon Microscope TS100 Assembly
Read the Edited Video Transcript for ‘Nikon Microscope TS100 Assembly’
Hey, this is Scott with Munday Scientific. I have this Nikon TS100 tissue culture microscope already disassembled, and I’m going to show you how to put it back together.
If you’re looking to disassemble the microscope instead, simply reverse the steps we’re covering here.
Shipping Tips Before Reassembly
If you’re shipping a Nikon TS100 to us:
- Wrap each component individually in bubble wrap
- Use a double-boxing method
- Secure all parts carefully
Proper packing greatly increases the chances that your microscope will arrive safely and in one piece.
Step 1: Reinstall the Head
The trinocular or binocular head is secured using three 3 mm screws.
Key Notes:
- The head is pinned in place
- It only aligns one way
- This makes installation straightforward and helps prevent mistakes
Installation Steps:
- Position the head correctly
- Align the pins
- Tighten the three 3 mm screws
Because of the pin alignment, it’s very difficult to install incorrectly.
Step 2: Reinstall the Stage
The stage is mounted using three 4 mm screws.
Important Tip:
Sometimes there may be:
- A washer
- A shim
Be sure to watch carefully for these components during reassembly, as they are important for proper alignment.
Installation Steps:
- Position the stage
- Align screw holes
- Replace any washers or shims if present
- Tighten the three 4 mm screws
Step 3: Connect the Light Source
The light source connector includes a keyway, so it will only fit one way.
Installation Steps:
- Align the connector with the keyway
- Insert it carefully
- Tighten the connector securely
- Attach the power cord
This ensures proper electrical connection.
Step 4: Install the Condenser
The condenser is installed underneath the stage and secured with a thumb screw.
Installation Steps:
- Slide the condenser into position
- Tighten the thumb screw
Once tightened, the condenser is locked in place.
Step 5: Configure the Phase Rings
For tissue culture applications, proper phase ring alignment is essential.
Make sure the correct:
- Condenser phase ring
- Objective phase setting
are selected for your intended magnification.
Ready for Tissue Culture Work
Once assembled:
- Head installed
- Stage mounted
- Light source connected
- Condenser secured
- Phase rings aligned
Your Nikon TS100 is ready to begin tissue culture observation.
Final Thoughts
The Nikon TS100 is a reliable and highly effective microscope for:
- Tissue culture
- Cell observation
- Laboratory applications
Reassembly is straightforward when you pay attention to alignment points, screws, and any small washers or shims.
Contact Information
If you have questions about Nikon TS100 microscopes, shipping, or service:
Contact Us
Online store: microscopemarketplace.com
Closing
Thanks for watching! If you liked this video and want more like it, subscribe to our Youtube.com channel.